- 1 - actf9181 - 1542mhz - dcc6c features ? low - loss rf filter for mobile systems ? low amplitude ripple ? no matching network required for operation at 50 ? ceramic p ackage for s urface m ounted ? t echnology ( smt ) ? lead - free production and rohs complian t package dimension s ceramic package: dcc6c pin configuration 2 input 5 output 1, 3, 4, 6 ground marking top view, laser marking " act : manufacturers mark f : saw filter 9 18 1 : part number : terminal 1 maximum ratings rating va lue unit input power level p 1 0 dbm dc v oltage v dc 0 v operating t emperature r ange t a - 4 0 ~ + 85 c storage t emperature r ange t stg - 40 ~ +85 c
- 2 - electrical characteristics item minimum typical maximum unit center frequency f c 1542 mhz insertion lo ss il 1523 . 0 0 . 1561 . 0 0 mhz -- 3.0 3.5 db g roup delay ripple 1523.00 . 1561.00 mhz 10 40 ns absolute attenuation dc . 800 .00 mhz 50 65 db 800 .00 . 900 .00 mhz 50 65 db 900.00 . 1242.00 mhz 50 55 db 1626 . 5 mhz 30 50 db 1842.00 . 1900.00 mhz 45 48 db 1900 .00 . 2500 .00 mhz 40 4 5 db amplitude ripple (p - p) 1523.00 . 1561.00 mhz ? 0.8 1.3 db vswr in/out 1523.00 . 1561.00 mhz 1.8 1 2.1 1 db input / output impedance (nominal) 50 rohs c ompli ant electrostatic sensitive device typical frequency response
- 3 -
- 4 - stability c haracteristics test item condition of test 1 mechanical shock (a) drops: 3 times on concrete floor (b) height: 1.0 m 2 vibration resistance (a) frequency of vibration: 10 ~ 55hz (b) amplitude: 1.5 mm (c) directions: x,y and z (d) duration: 2 hours 3 moisture resistance (a) condition: 40c, 90~95% r.h. (b) duration: 96 hours (c) wait 4 hours before meas urement 4 climatic sequence (a) + 70 c for 16 hours (b) +55 c for 24 hours, 90~95% r.h. (c) - 25 c for 2 hours (d) +40 c for 24 hours, 90~95% r.h. (e) wait 4 hours before measurement 5 high t emperature e xposure (a) temperature: 70c (b) duration: 250 hours (c) wait 4 hours before measurement 6 thermal impact (a) +70c for 30 minutes ? - 25c for 30 minutes repeated 3 times (b) wait 4 hours before measurement requirements : the saw filer shall remain w ithin the electrical specifications after tests. remarks ? saw devices should not be used in any type of fluid such as water, oil, organic solvent, etc. ? be certain not to apply voltage exceeding the rated voltage of components. ? do not operate outside the recommended operating t emperature range of components. ? sudden change of temperature shall be avoided, deterioration of the characteristics can occur. ? be careful of soldering temperature and duration of components when soldering. ? do not place soldering iron on the body of compone nts. ? be careful not to subject the terminals or leads of components to excessive force. ? saw devices are electrostatic sensitive . p lease avoid static voltage during operation and storage. ? u ltrasonic cleaning shall be avoided . ultrasonic vibration may cause destruction of components. test circuit recommended land pattern
- 5 - packing information carrier tape reel dimensions outer packing type quantity dimension description weight carton box 10000 19019095 anti - static plastic bag & carton box 1 reel / bag 5 bags / box ( 10 000 pcs) 10 bags / box ( 2 0000 pcs) 0.85 carton box 2 0000 190190190 1. 8 0 unit: mm unit: kg
- 6 - recommended soldering profile c act all rights reserved. 1. the specifications of this device are subject to change or obsolescence without notice. 2. typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment m anufacturer. 3. our liability is only assumed for the surface acoustic wave (saw) component(s) per se, not for applications, processes and circuits implemented within components or assemblies.
|
